How to Change Apple Watch Band?

It's very convenient to change the Apple Watch band, which is also one of the prominent features of Apple Watch design. Prepare the Apple watch and the new band. Follow the steps below.

1. Flip over the apple watch. On the back of the Apple Watch, you'll notice a release button at each end close to where the band joins the watch(as shown in the below figure).

2. Gently press your finger on the band release button, then slowly slide the connecting rod of the band outwards along the watch edge. You'll remove one side band. 

3. Repeat it at the other side to remove the band totally from the apple watch.

4. It is also very convenient to replace the strap. Hold the new band and start from where the old one fell off just now. Simply slide the connecting rod of the band from one side into the band groove until you hear a slight "click", the band is in place one end

5. Do it again at the other end. The apple watch band is done changing.

Note: 

(1) Attention should be given when assembling the new band to the band sides. Don't reverse the band front with its backside. Otherwise, you'll have to take the trouble of reworking the process. 

(2) Besides, bands of 42mm and 38mm are not interchangeable, so replace it with one of the same size.

Watch Maintenance Tips

1. Surface furbishing. If the watch gets some scratches, put a drop of water on the table, squeeze a little toothpaste and rub the scratched surface, hopefully you can remove the scratches and make it polish as new.

2, To store the watch for a long period storage without wearing. You should wind it on a regular basis, say once a month. The automatic movement of the watch should be gently swing back and forth for a few minutes or wear on the wrist for a period of time so that it automatically winding. So that the parts do not remain stationary for a long time to ensure the smooth performance.

3, Do not put the watch in a mothballs wardrobe, or you may risk spoiling the lubricant inside.

4, the ordinary mechanical table by the tide, can be used dry cotton pressure on the watch, and then 40 watts of light bulbs bake for 5 minutes, the moisture in the table can be all evaporated out. If the quartz electronic watch is affected by the tide, a few small pieces of calcium chloride, with gauze wrapped, and then open the electronic watch cover, the package of calcium chloride and electronic watch into a non-leaking plastic bag or glass, sealed. Generally 3 hours or so can be removed tide, so that the electronic meter back to normal.

For severely damp tables, the moisture absorption time can be extended appropriately.

5, wearing a watch, the sweat on the case of the case is corrosive, all-steel case is nickel-chromium alloy, corrosion resistance is better, semi-steel case is copper, long-term contact with sweat, easy to corrode, should often use a soft cloth to wipe sweat or cushion on the plastic table, to prevent its erosion by sweat.